Planar F0399
F0399 differential filter is a very compact and flat Ku bandpass filter ideal for on-board digital signal processors where small footprint, low in-band flatness and differential output are required. Three ports, characterized by a 50ohm planar interface, are used as RF input/output. Custom geometry, RF interfaces and port configurations are available upon request.
KEY FEATURES
- Central Frequency: 13.775 GHz
- Bandwidth: 2050 MHz
- Operating temp: -10°C – +75°C
- Max Insertion Loss: 8.5 dB
- Spurious-free range: up to 23.1GHz
- Size: < 16x30x10 mm
- RoHS compliant
- Customizable design
Planar F0615
PN F0615 is an L-band IFF pre-selector active duplexer for defence applications compatible with planar circuitry. The device provides up to 20dB of output gain and it is supplied with a 15V power line. The device exhibits high isolation between channels and high stability over temperature. Custom geometry, RF interfaces, output gain, supply voltage and port configurations are available upon request.
KEY FEATURES
- Channel 1 central frequency: 1030 MHz
- Channel 2 central frequency: 1090 MHz
- Operative bandwidth: 13 MHz
- In-band gain: 17dB
- Max in-band gain variation: 2.3 dB
- Input 1dB compression point: – 24dBm
- Return Loss: > 14dB
- Channel Isolation: > 80dBc
- Size: < 90x90x8.2 mm
- Operating temp: -40°C / +85°C
- RoHS compliant
- Customizable design
Planar F0631
F0631 Planar Filter is a connectorized UHF-band lumped bandpass filter which can withstand up to 25W of input RF power. It is based on COTS lumped elements and high-performance PCB substrates. The component is developed to be integrated in satellite payload for SatCom applications. Custom geometry and response are available upon request.
KEY FEATURES
- Central Frequency: 435MHz
- Bandwidth: 70 MHz
- In-band ripple: 0.1dBpp
- Insertion loss: 0.3dB (Max.)
- In/Out RL : 18dB (typ.)
- Input power: 25W CW
- Size: < 44x75x14mm
- 50 Ohm SMA interfaces
- Operating temp: -40 / +85°C
- RoHS compliant
- Customizable design
Planar F0632
F0632 Planar Filte is a connectorized L-band lumped bandpass filter which can withstand up to 25W of input power. It is based on distributed microstrip resonators and resonators with COTS lumped elements on high-performance PCB substrates. The component is developed to be integrated in satellite payload for SatCom applications. Custom geometry and response are available upon request.
KEY FEATURES
- Central Frequency: 1190MHz
- Bandwidth: 41 MHz
- In-band ripple: 0.1dBpp
- Insertion loss: 0.7dB (Max.)
- In/Out RL : 15dB (typ.)
- Input power: 25W CW
- Size: < 40x80x14mm
- 50 Ohm SMA interfaces
- Operating temp: -40 / +85°C
- RoHS compliant
- Customizable design
Planar F0633
F0633 Planar Filter is a connectorized S-band planar bandpass filter that can withstand up to 25W of input power. It is based on distributed microstrip resonators
on high-performance PCB substrates. The component is developed to be integrated with satellite payload for SatCom applications. Custom geometry and response are
available upon request.
KEY FEATURES
- Central Frequency: 2490MHz
- Bandwidth: 17 MHz
- In-band ripple: 0.1dBpp
- Insertion loss: 1.1dB (Max.)
- In/Out RL: 15dB (typ.)
- Input power: 25W CW
- Size: < 38x98x17mm
- 50 Ohm SMA interfaces
- Operating temp: -40 / +85°C
- RoHS compliant
- Customizable design
Planar F0646
PN F0646 is a C-band SMD/connectorized filter developed for RF conditioning systems compatible with planar circuitry. The device provides 0.5dBpp of in-band IL ripple and out of band attenuation over 30dB at the desired frequencies. The component is quite compact due to capacitive loading and it can be additionally shrunk upon request.
KEY FEATURES
- Central frequency: 3300MHz
- Operative bandwidth: 600MHz
- Max in-band IL: 1.5dB
- Max in-band IL ripple: 0.5dBpp
- Return Loss: > 14dB
- Size: < 10x14x2mm
- Operating temp: -40°C / +85°C
- RoHS compliant
- Customizable design
Planar F0647
PN F0647 is a very compact C-band suspended microstrip filter for terrestrial applications. The device provides low loss and 40dB rejection up to 10GHz with a stable response over temperature.
Custom geometry, BW and RF interfaces are available upon request.
KEY FEATURES
- Central frequency: 4.7GHz
- Bandwidth: 600MHz
- Max Insertion Loss: 1.3dB
- Spurious-free range: up to 10GHz
- Size: < 19x46x12.7mm
- Operating temp: -40°C / +85°C
- Customizable design
Multilayer F0111
The F0111 is a Ka-band integrated waveguide diplexer for SatCom (Ground Segment) and low loss SMT compliant applications. The device is very compact and is realized in silicon-based micro-machining technology in a single die. It provides high isolation between diplexer channels and very small volume occupation (30x45x1.8 mm).
Custom geometry, RF interfaces and port configurations are available upon request.
KEY FEATURES
- Central Frequency RX: 20.45 GHz
- Bandwidth RX: 1.5GHz
- Central Frequency TX: 30.25 GHz
- Bandwidth TX: 1.5GHz
- Operating temp: -40°C – +85°C
- Max Insertion Loss@20GHz: 0.8 dB
- Max Insertion Loss@30GHz: 0.9 dB
- Channel Isolation over 70dB
- Return Loss over 15dB (18dB Typ.)
- Size (die): < 30x45x1.8 mm
- RoHS compliant
- Customizable design
Multilayer F0638
F0638 is compact surface mountable L-band filter in LTCC technology can be easily integrated in frequency converter equipment. Characterized by an wide band pass with flat insertion-loss in-band response, it is ideal for SatCom or radiolink applications.
KEY FEATURES
- Central Frequency: 1020 MHz
- Bandwidth: 500 MHz
- Operating temp: -10°C / +65°C
- Max Insertion Loss: 9.7 dB
- Insertion Loss Flatness: < 1.4 dB
- Spurious-free range: up to 4.0 GHz
- Size: < 44.0 mm x 12.0mm x 1.0 mm
- Customizable design
Multilayer F0666
F0666 is a planar-compatible cavity filter that can be mounted directly on PCB. Transmission zeros are placed close to the passband to improve rejection where it is required. The filter is characterized by very good thermal stability and it is developed for SatCom applications. Custom geometry, in-band Insertion Loss ripple and port configurations are available upon request.
.
KEY FEATURES
- Central Frequency: 20GHz
- Bandwidth: 250 MHz
- Insertion loss: 2.2dB (typ.)
- In-band ripple: 1 dBpp
- In/Out RL: 19dB (Min.)
- Size: < 33x44x4.5mm
- Planar-compatible component
- Operating temp: -20 / +80°C
- RoHS compliant
- Customizable design
- Equivalent τf = 9 ppm/°C
MICROWAVE FILTERS
Coaxial Filters
Ceramic Filters
Reconfigurable Filters