Innovation and Technology at Your Service

Posts Tagged "Filters"

Miniaturized Filters for on-board processor-based payloads
Paola Farinelli

Miniaturized Filters for on-board processor-based payloads

on 9 Jan 2020 in News | 0 comments

RF Microtech has been awarded a new ESA ARTES AT project entitled COKKO ‘COmpact Ku/Ka-band filters for On-board processor-based payloads’ The project goal is the development and space assessment of miniaturised Ku– and Ka-band RF filters integrating a wide-band differential interface for on-board digital signal processors. Up to 30% size reduction can be achieved by combining advanced design techniques with three-dimensional implementation techniques such as Low Temperature Co-fired Ceramics (LTCC) or multilayer Printed Circuit Boards (PCB).   RF Microtech is the main proponent and prime contractor of the project, that will be conducted in collaboration with Thales Alenia Space – Italy For more information contact us and visit the project web page at this...

Read More
COKKO
Paola Farinelli

COKKO

on 7 Jan 2020 in Projects | 0 comments

‘COmpact Ku/Ka-band filters for On-board processor-based payloads’ ESA project for the development and space assessment of miniaturised Ku- and Ka-band RF filters integrating a wide-band differential interface for on-board digital signal processors (ESA Artes Advanced Technology, Contract AO/1-9717/19/NL/NM)   OBJECTIVES Miniaturising the broadband filters and implementing differential interfaces to the ADCs and DACs (e.g. by integrating baluns) will significantly impact the size of analogue pre- and post-processors. Up to 30% size reduction could be achieved by combining advanced design techniques with three-dimensional implementation techniques such as Low Temperature Co-fired Ceramics (LTCC) or multilayer Printed Circuit Boards (PCB). At the same time, due attention must be paid to implementing good gain and phase stability and tracking through the different analogue signal processing chains, which is important in digital beam forming applications. The objective of this project is to design, manufacture and test miniaturised Ku- and Ka-band RF filters integrating a wide-band differential interface for on-board digital signal processors.   TRL Level From 4 to 6   STATUS On-going   PARTNERS   RF microtech s.r.l. Italy – PRIME CONTRACTOR http://www.rfmicrotech.com   Thales Alenia Space Italy Italy...

Read More
Bilateral Meeting with the European Space Agency
Paola Farinelli

Bilateral Meeting with the European Space Agency

on 19 Jun 2019 in News |

On 13th June, in Perugia, it took place the bilateral meeting between RF Microtech and the European Space Agency (ESA), with the participation of the ESA’s top management Dietmar Schmitt, Head of Technologies and Products Division, Domenico Mignolo, Head of Ground and User Segment Technologies & Products Section and Fabrizio De Paolis, Ground Segment Engineer in Telecommunications and Integrated Applications. As a matter of fact, since its foundation, RF Microtech collaborates with ESA in the framework of the ARTES Advanced Technology Program (formerly named ARTES Element 5 sub-element 5.1), which is the Agency’s main program for preparatory development of satellite communications. RF Microtech has accomplished several research projects which allowed the company to develop innovating electronic components for space applications, in particular in the field of mobile satellite antennas, filters and radio frequency circuits for space applications. This meeting represents a clear recognition of RF Microtech as a “Success Story” during these years of productive cooperation with ESA, to whom RF Microtech is extremely grateful for the significant and reliable support offered by...

Read More
HiPeD
Paola Farinelli

HiPeD

on 18 Jun 2019 in Projects |

‘High-Performance Dielectric Resonators’ ESA project for the development and space assessment of high performance resonators based on dielectric technology (ESA Artes Advanced Technology, Contract 4000126886/19/NL/MM)   OBJECTIVES To develop and experimentally verify high performance dielectric resonators with a quality factor (Q) times frequency (f) figure of merit (Qxf) of at least 250,000 GHz for use in input and output multiplexers in the frequency range from C- to Ka-band (3 ÷ 30 GHz).  The target is to develop enabling technology for a new source of high Q dielectric resonators and to provide a 25% increase in Q factor with respect to currently available European resonator materials.   TRL Level From 3 to 5   STATUS On-going   PARTNERS   RF microtech s.r.l. Italy – PRIME CONTRACTOR http://www.rfmicrotech.com     Department of Engineering, University of Perugia http://www.ing.unipg.it/it/  ...

Read More
International Paris Air Show 2019
Paola Farinelli

International Paris Air Show 2019

on 10 Jun 2019 in News |

RF Microtech is pleased to present its innovative solutions and components at the 53rd edition of the International Paris Air Show 2019. The show will take place at the Le Bourget Parc des Expositions from 17 to 23 June 2019, and once again will bring together all the players in this global industry around the latest technological innovations. Visit RF Microtech at the booth of the Umbria Aerospace Cluster  (Hall3, D40), a cluster of 28 Umbrian companies operating in the field of aeronautics, space and defence (http://umbriaerospace.com/)....

Read More